Explosion-proof electric heat tracing economic eyewash BD-590 is an outdoor anti-freezing shower eyewash. It is a kind of antifreeze eyewash. It is mainly used for workers’ eyes, face, body and other accidentally splashed by toxic and harmful substances. This eyewash rinses to reduce further damage. It can be used normally in the range of -35 ℃ ~ 45 ℃. The outer shell is made of acid and alkali resistant PVC, the inner tube is made of 304 stainless steel, and the temperature-limiting electric heating cable is wound freely. The insulation layer is composed of polyurethane, and the overall color is white and green.
Technical parameters of this antifreeze eyewash:
Redhead nozzle: 304 stainless steel waste water recycling basin
Punching nozzle: stainless steel horn with ABS green punching head, with 10 “304 stainless steel wastewater recycling basin
Shock valve: 1 “corrosion-resistant 304 stainless steel ball valve
Perforated valve: 1/2 “corrosion-resistant 304 stainless steel three-way ball valve
Water inlet: 1 “inch male thread
Water outlet: 1 1/4 inch male thread
Flow rate: according to the pipeline pressure, the flow rate changes accordingly. Within the specified water pressure range, the punching flow rate is ≥11.4 liters / minute, and the punching flow rate is ≥75.7 liters / minute
Water pressure: 0.2MPA ~ 0.6MPA
Voltage: 220V ~ 250V
Power: 200W
Water source: Use clean or filtered water source
Use environment: places where hazardous substances are splashed, enter the polluted environment of chemicals, hazardous liquids, solids, gases, etc.
Usage Tips: This eyewash is suitable for use in places with explosion-proof requirements. The corresponding explosion-proof level needs to be customized according to the use environment. The appearance is slightly different, and the actual product shall prevail.
Post time: Apr-30-2020
