Short Lead Time for Stand Eye Wash BD-540F – Polyurethane Shoe Foaming
Short Lead Time for Stand Eye Wash BD-540F – Polyurethane Shoe Foaming Detail:
Technical Data:
Valve: Eye wash valve is made of 1/2” 304 stainless steel ball valve
Supply: 1/2″ FNPT
Waste: 1 1/4″ FNPT
Eye Wash Flow≥11.4L/Min
Hydraulic Pressure: 0.2MPA-0.6MPA
Original Water: Drinking water or filtered water
Using Environment: Places where has hazardous substance splashing, such as chemicals, hazardous liquids, solid, gas and other contaminated environment where may be burning.
Special Note: If the acid concentration is too high, recommend to use 316 stainless steel.
When using ambient temperature below 0℃, use antifreeze eye wash.
Can install anti-scalding device to avoid the media temperature is too high in the pipe after
the sun exposure and cause user scalding.The standard anti-scalding temperature is 35℃.
Standard: ANSI Z358.1-2014
Product detail pictures:
Related Product Guide:
Advantages of Using a Lockout System
Lockout Tagout – Everything You Need to Know
Our team through professional training. Skilled professional knowledge, strong sense of service, to meet the service needs of customers for Short Lead Time for Stand Eye Wash BD-540F – Polyurethane Shoe Foaming, The product will supply to all over the world, such as: Poland , Plymouth , Malta , Our Company has professional engineers and technical staff to answer your questions about maintenance problems, some common failure. Our product quality assurance, price concessions, any questions about the products, Please feel free to contact us.
By Cheryl from Hanover - 2016.10.25 15:53
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Geraldine from California - 2015.09.21 11:01