BD-540E Pedestal Mounted Eye & Face Wash Station – Full-Coverage Stainless Steel Solution
01
Full Facial Coverage: The single ABS eye/face wash head incorporates a sloped surface design that directs water across the entire face, delivering complete coverage from forehead to chin for thorough decontamination.
02
All Stainless Steel Bowl & Body: Both the eyewash bowl and main structural body are fabricated from 304 stainless steel, providing superior resistance to physical damage, corrosion, and harsh chemicals. 316 stainless steel is available for extreme corrosive environments.
03
Instantaneous Response: Engineered for activation in under 1 second, ensuring immediate water flow when exposure occurs.
04
Auto Pop-Off Dust Cover: The ABS eye/face wash head is fitted with a dust-proof cover that automatically pops off upon activation, maintaining nozzle cleanliness between uses.
05
Optimal Flow Rate: Delivers a steady, aerated flow meeting ANSI Z358.1 requirements, providing effective flushing without causing discomfort or secondary injury.
06
High-Visibility Manual Activation: A prominent yellow push board enables fast, intuitive operation — even under stress or limited visibility.
07
Fully Customizable: Tailored solutions available including material upgrades, alarm systems, and optional accessories to meet specific site requirements.
|
Feature |
Specification |
|
Model |
BD-540E |
|
Material (Plumbing & Body) |
High-quality 304 Stainless Steel |
|
Eyewash Bowl |
304 Stainless Steel |
|
Eye/Face Wash Head |
ABS, Single Head with Sloped Surface Design, Yellow Auto Pop-Off Dust Cover |
|
Eyewash Valve |
1/2'' 304 Stainless Steel Ball Valve |
|
Activation Method |
High-Visibility Manual Push Board |
|
Flow Rate |
≥11.4 L/Min (3 GPM) |
|
Coverage |
Full Facial Coverage |
|
Hydraulic Pressure |
0.2 MPA – 0.6 MPA |
|
Water Source |
Plumbed, Potable Water or Filtered Water |
|
Compliance |
Meets ANSI Z358.1 & CE Standards |
· A controlled, low velocity flow rinses both eyes and is not harmful to the user.
· Water flow is high enough to allow user to hold eyes open while rinsing.
· Spray heads are protected from airborne contaminants. Covers can be easily removed by water flow.
· Unit delivers no less than 3 gallons(11.4 liters) per minutes of clean waters for at least 15 minutes.
· Water flow pattern is positioned between 33” (83.8 cm) and 53” (134.6 cm) from the floor and at least 6” (15.3 cm) from the wall or nearest obstruction.
· Instant activation, hands-free stay-open valve.
· Easily user-accessible actuator.
· Unit washes both eyes simultaneously.
Protective Packaging:
Each unit is encased in molded foam padding and an outer reinforced carton, safeguarding the product against impact and rough handling during transit.
