BD-540D Freeze-Protected Pedestal Mounted Eye Wash Station – Reliable Emergency Safety in Cold Climates
01
Freeze Protection via Heat Tracing: Internal pipework is wrapped with self-regulating heat trace cable enclosed within a PVC protective jacket, preventing water from freezing in the pipes and ensuring the valve can always be opened — a critical capability in cold climates where frozen valves render standard units inoperable.
02
Year-Round Operational Reliability: Designed for continuous deployment in sub-zero environments, the heating system maintains water at a usable temperature throughout the piping system, guaranteeing the unit is always ready for emergency activation.
03
High-Visibility Yellow ABS Bowl & Nozzles: The bright yellow ABS eyewash bowl and spray heads are easy to locate in emergency conditions and provide excellent resistance to corrosion and chemical exposure, well-suited to harsh outdoor environments.
04
Auto Pop-Off Dust Covers: ABS spray heads are equipped with dust-proof covers that automatically pop off upon activation, keeping nozzles clean and unobstructed between uses.
05
Instantaneous Response: Precision-engineered for activation in under 1 second, delivering immediate water flow to minimize chemical or contaminant exposure.
06
Optimal Eyewash Performance: Delivers a steady, aerated flow of ≥11.4 L/min (3 GPM) in compliance with ANSI Z358.1, ensuring effective flushing without causing discomfort.
07
Fully Customizable: Available with additional alarm systems, thermostat controls, material upgrades, and optional accessories to meet specific site safety requirements.
|
Feature |
Specification |
|
Model |
BD-540D |
|
Freeze Protection |
Self-Regulating Heat Trace Cable with PVC Protective cover |
|
Material (Plumbing) |
304 Stainless Steel (internal) |
|
Eyewash Bowl |
High-quality Yellow ABS |
|
Eyewash Nozzles |
High-grade ABS (Safety Yellow), with Auto Pop-Off Dust Covers |
|
Eyewash Valve |
1/2'' 304 Stainless Steel Ball Valve |
|
Activation Method |
High-Visibility Manual Push Board |
|
Eyewash Flow Rate |
≥11.4 L/Min (3 GPM) |
|
Hydraulic Pressure |
0.2 MPA – 0.6 MPA |
|
Water Source |
Plumbed, Potable Water or Filtered Water |
|
Operating Environment |
Sub-Zero / Cold Climate Rated |
|
Compliance |
Meets ANSI Z358.1 & CE Standards |
· A controlled, low velocity flow rinses both eyes and is not harmful to the user.
· Water flow is high enough to allow user to hold eyes open while rinsing.
· Spray heads are protected from airborne contaminants. Covers can be easily removed by water flow.
· Unit delivers no less than 3 gallons(11.4 liters) per minutes of clean waters for at least 15 minutes.
· Water flow pattern is positioned between 33” (83.8 cm) and 53” (134.6 cm) from the floor and at least 6” (15.3 cm) from the wall or nearest obstruction.
· Instant activation, hands-free stay-open valve.
· Easily user-accessible actuator.
· Unit washes both eyes simultaneously.
Protective Packaging:
Each unit is encased in molded foam padding and an outer reinforced carton, safeguarding the product against impact and rough handling during transit.
