BD-508B Wall-Mounted ABS Bowl Eye Wash Station
01
Eye-Catching High Visibility: The bright yellow ABS bowl and spray heads offer superior contrast against industrial backdrops, allowing injured workers to locate the safety station easily under panic or dimmed light conditions.
02
Aerated & Gentle Eye Irrigation: Equipped with advanced spray heads that deliver a steady, aerated water stream. This soft, bubbling flow ensures thorough flushing of dangerous contaminants without causing discomfort or secondary pressure damage to sensitive eye tissues.
03
Instantaneous Response: Precision engineering allows the unit to be activated in less than 1 second via the high-visibility Hand Push Board.
04
High-Visibility Manual Control: Features a prominent yellow push board for rapid activation, ensuring the unit can be found and operated easily during critical emergencies.
05
Contamination Protection: Features twin spray nozzles protected by pop-off dust covers that automatically lift off when the eyewash is activated, ensuring the nozzles remain clean.
06
Optimal Eyewash Performance: Equipped with high-grade ABS spray heads in safety green that provide a constant flow of 11.4 L/min.
07
Comfortable Flow: The water stream is aerated and steady, ensuring effective flushing of contaminants without causing discomfort or secondary injury to the user’s eyes.
08
Manual Hand-Control Activation: Designed for simplicity and reliability, utilizing a high-visibility manual push board for the eyewash station.
09
Fully Customizable: We provide tailored solutions to meet specific site requirements, including material upgrades, additional alarm systems, or optional accessories.
|
Feature |
Specification |
|
Model |
BD-508B |
|
Eye Wash Bowl |
High-Quality ABS Plastic (Eye-Catching Yellow) |
|
Eyewash Nozzles |
High-grade ABS (Safety Green) |
|
Activation Method |
High-Visibility Manual Pull Board |
|
Eyewash Flow Rate |
≥11.4 L/Min (3 GPM) |
|
Inlet |
1/2’’ |
|
Outlet |
1-1/4’’ |
|
Hydraulic Pressure |
0.2 MPA - 0.6 MPA |
|
Water Source |
Plumbed, Potable Water or Filtered Water |
|
Compliance |
Meets ANSI Z358.1 & CE Standards |
·A controlled, low velocity flow rinses both eyes and
is not harmful to the user.
·Water flow is high enough to allow user to hold eyes
open while rinsing.
·Spray heads are protected from airborne contaminants.
Covers can be easily removed by water flow.
·Unit delivers no less than 0.4 gallons(1.5 liters) per
minutes of clean waters for at least 15 minutes.
·Water flow pattern is positioned between 33” (83.8
cm) and 53” (134.6 cm) from the floor and at least
6” (15.3 cm) from the wall or nearest obstruction.
·Instant activation, hands-free stay-open valve.
·Easily user-accessible actuator.
·Unit washes both eyes simultaneously. Check below
test gauge for a reference of the correct water flow
cover area.
Protective Packaging:
Each unit is encased in molded foam padding and an outer reinforced carton, safeguarding the product against impact and rough handling during transit.
